Controller and Others - Specification Table

ACC-300 Controller for ACG Pump - Specifications

Item Specifications
Model ACC-300
Product code RK842300
Power source AC100V, ±10%, 50/60Hz
Output Solenoid DC24V, max.0.2A
Alarm signal 1a,Dry contact, max.1A
Input S1,S2 signal 1a,Input by dry contact(2 points)
Alarm signal 1a,Input by dry contact
mass Approx.0.8kg

ACC-200 Controller for ACV Precise Fluid Dispenser - Specifications

Item Specifications
Model ACC-200
Product code RK842200
Power source AC100V, ±10%, 50/60Hz
Output Solenoid DC24V, max.0.2A
Operation signal 1a,Dry contact, max.1A
Input External start signal 1a,Input by dry contact
Alarm signal 1a,Input by dry contact
mass Approx.0.8kg

ACC-802 Controller for ADV Precise Fluid Dispenser - Specifications

Item Specifications
Model/ Product code ACC-802 / RK387200
Input voltage AC100V
Operation input and display method Touch panel method
Exhalation time range 0.6-70sec(0.21cm )
Set function (1)Mode of operation(Automatic operation and manual selection),(2) Exhalation speed,(3) Discharge volume,(4) Amount of sack backing,(5) Maintenance function,(6) Pumping mode ACG,(7) Four driving mode memory
Mass 5.0kg

HV-2 Handy dispensing gun- Specifications

Item Specifications
Operating pressure normal 2.9MPa(30kgf/cm2
Required handle gripping force Approx.1.5kg
Mass Approx.0.4kg
Product code RK381300

Checking of Operation's Sensor - Specifications

  Item Specifications
Sensor Power source voltage 12-24 DC±10% Ripple P-P 10% or less
Consumption current 15mA or less
Output NPN transistor open collector
·Emax. current entry :50mA
·Eapplied voltage :30V DC or less
·Eresidual voltage 0.4 DC or less(at current entry 50mA)
Operation indicator lamp red LED (ON when output is ON without indicator rod)
Protection structure IP67 (IEC) immersion proof type(JIS)
Cable length 3m

Air control Panel - Specifications

Item AUC-300 AUC-200 AUC-500
Used For pump for Precise fluid Dispenser For both pump & Dispenser
Operating pressure Max.0.7MPa { 7kgf/cm2 }
Solenoide Valve Operating voltage range DC21.6-26.4V
Current 65mA (at applied voltage DC24V)
Mass Approx.2kg Approx.2kg Approx.2.2kg
Product code RK873400 RK873500 RK873600

Contact

  • IHI Rotating Machinery Engineering Co.,Ltd.

  •  
  • 135-0062
  • 7-12,1Chome Shinonome Kotou-Ku Tokyo Japan KDX Toyosu GRAN SQUARE
  • TEL:+81-3-6703-0440 FAX:+81-3-6703-0443

Inquiries by phone

Inquiry by e-mail